Author Topic: Wiring connection  (Read 1300 times)

R3SC

  • Jr. Member
  • **
  • Posts: 32
  • Brit V-Twin Fan
Wiring connection
« on: December 29, 2013, 08:11:52 PM »
Hi Guys

It appears I have a small problem which my photographic record or memory can't help me with and I wondered if you could help.

Where the rear brake splitter mounts to the frame the bolt that fixes it has a brass nut and washer on it for connection of a wire, probably an earth but I cannot work out which wire is fixed onto this bolt. The loom in that area contains the starter solenoid live, the three alternator wires and the two spade connections for the rear brake light switch but no ring terminal to fit onto the M6 bolt.

Can you help?

Pete.

R3SC

  • Jr. Member
  • **
  • Posts: 32
  • Brit V-Twin Fan
Re: Wiring connection
« Reply #1 on: December 30, 2013, 01:01:38 PM »
Hi All,

I've found the cable! It's obviously the main earth and it had fell down behind my workbench which is why I had lost track of what was attached to this particular bolt!

Cheers