Author Topic: clutch master cylinder  (Read 517 times)

Paul W

  • Newbie
  • *
  • Posts: 6
  • Brit V-Twin Fan
clutch master cylinder
« on: April 07, 2021, 09:37:19 AM »
HI EVERYONE,
HOPE YOU ARE ALL KEEPING WELL.
where is the best place to purchase a cylinder repair kit for my clutch on the v1000

Dave Snr

  • HOC Committee
  • Jr. Member
  • *
  • Posts: 63
  • Brit V-Twin Fan
Re: clutch master cylinder
« Reply #1 on: April 07, 2021, 05:36:39 PM »
Hi Paul,

Clutch master cylinder (handlebar end) is Brembo PS15, same as the brake master cyllinder, so for both you need Brembo seal kit 110273920.
Same parts were used on MotoGuzzi, Ducati, Laverda, BMW etc, so google it and you can buy from your preferred supplier.
For me, Pre-Covid, I would ride down to Slater Laverda to buy them and have a chat about Hesketh, Laverda etc, but online I would probaby used Gutsibits.

The rear brake master cylinder is Brembo PS12 which needs Brembo seal kit 110279720.

Hope that helps,

Dave H

Paul W

  • Newbie
  • *
  • Posts: 6
  • Brit V-Twin Fan
Re: clutch master cylinder
« Reply #2 on: April 08, 2021, 10:26:43 AM »
Thanks Dave,
Thats a great help i will get on it as soon as then its the mot thats required.
Cheers

Rob B

  • Full Member
  • ***
  • Posts: 193
  • L-Twins and Tripples Fan
Re: clutch master cylinder
« Reply #3 on: April 29, 2021, 08:23:21 PM »
Hello Dave and Paul,

While on the subject, are there any details available on the seals needed for the Clutch Slave Cylinder / Piston? I have the usual problem of engine oil mixing with the clutch fluid.

Thanks,

Robert
Hesketh V1000 Black/Gold/Gold EN10++
Hesketh V1000 Red/Black/Black EN10++
Hesketh V1000 Black/Red/Black EN0
Laverda 180 Jota  Orange!
Triumph 900 Sprint

Dave Snr

  • HOC Committee
  • Jr. Member
  • *
  • Posts: 63
  • Brit V-Twin Fan
Re: clutch master cylinder
« Reply #4 on: May 03, 2021, 09:06:41 AM »
Hi Robert,

I've not done my slave cylinder, but I do know that Chairman Richard did his recently and there is a useful post on this forum in the "Request for Help" section titled Clutch Slave cylinder with gives seal details, diagrams and details of ignoring the manual on spring location!

Dave

Rob B

  • Full Member
  • ***
  • Posts: 193
  • L-Twins and Tripples Fan
Re: clutch master cylinder
« Reply #5 on: May 06, 2021, 07:37:59 PM »
Perfect!

Thank you Dave.

Robert
Hesketh V1000 Black/Gold/Gold EN10++
Hesketh V1000 Red/Black/Black EN10++
Hesketh V1000 Black/Red/Black EN0
Laverda 180 Jota  Orange!
Triumph 900 Sprint